DTSFab.com (Desert, Trail and Sand)

The Machine Shop => Everything Cad => Topic started by: Boostinjdm on January 21, 2009, 03:07:15 PM

Title: Flanges
Post by: Boostinjdm on January 21, 2009, 03:07:15 PM: anybody have a drawing of a vw type 2/4 and/or 930 flange they would care to share? I'm looking for the whole flange not just the flat part with the bolt pattern.
Title: Re: Flanges
Post by: Doug Heim on January 21, 2009, 05:06:54 PM: I do. What do you mainly need to know? I have them in DXF or DWG format. I have all the above!
Title: Re: Flanges
Post by: Boostinjdm on January 21, 2009, 08:12:01 PM: VW type 2/4 with a spine count you can make a shaft for. Here is the dimensions I am looking for. I use auto cad, I would be more than happy to accept a dwg. file if you would be kind enough to post it or email it to me. Thanks.
Title: Re: Flanges
Post by: Boostinjdm on January 21, 2009, 08:13:22 PM: I forgot..... mm: (ks)....there ya go. ;D
Title: Re: Flanges
Post by: Admin on January 21, 2009, 08:20:49 PM: http://dtsfab.com/index/index.php?topic=873.msg14053#new (http://dtsfab.com/index/index.php?topic=873.msg14053#new)
Title: Re: Flanges
Post by: Boostinjdm on January 21, 2009, 08:25:52 PM: I'd bet money that one is longer than I'll need. ;)
Title: Re: Flanges
Post by: Admin on January 21, 2009, 08:31:16 PM: Quote from: Boostinjdm on January 21, 2009, 08:25:52 PM
I'd bet money that one is longer than I'll need. ;)

I cant remember the length, i bought one originally, i think cv to cv flange ends up about 9.5", for your use, you could cut it in half and weld one cup to one side, and have the other left with the splines to take it apart... ;D It has been done before that way... The bearings go onto the cv cups them selves...
Title: Re: Flanges
Post by: Yoshi on January 21, 2009, 08:31:58 PM: Quote from: Boostinjdm on January 21, 2009, 08:25:52 PM
I'd bet money that one is longer than I'll need. ;)
i'd bet money you've never heard a chick say that to ya, lol....
Title: Re: Flanges
Post by: Boostinjdm on January 21, 2009, 08:46:04 PM: Quote from: Yoshi on January 21, 2009, 08:31:58 PM
i'd bet money you've never heard a chick say that to ya, lol....

Just once, but I think she was half blind and had a peg leg. I told her it was kinda like leftovers from supper. I'd let her eat half tonight and I'd give her the rest tommarrow. ;D
Title: Re: Flanges
Post by: Boostinjdm on January 21, 2009, 08:49:59 PM
Title: Re: Flanges
Post by: fabr on January 22, 2009, 10:02:34 AM: huh?
Title: Re: Flanges
Post by: Boostinjdm on January 25, 2009, 01:01:20 AM: nevermind, plan change. see my pilot thread for details.
Title: Re: Flanges
Post by: phelpsracing1 on January 25, 2009, 12:06:11 PM: Well, I'm curious now as to what the dimensions for the flange are? Does the 002 flange have the same dimensions as the 091 flange?
Title: Re: Flanges
Post by: LiveWire on January 25, 2009, 07:03:03 PM: Quote from: Phelpsracing1 on January 25, 2009, 12:06:11 PM
Well, I'm curious now as to what the dimensions for the flange are? Does the 002 flange have the same dimensions as the 091 flange?

The 091 and 002 flanges both use Type 2 CVs sot he bolt pattern is the same. I am not sure if the overall length is the same, I would guess they are. There are flanges for both splines that fit the 930 CVs.