DTSFab.com (Desert, Trail and Sand)

UTV's Off Road ( RZR, YXZ, Mini Buggy, Carts,etc.) => UTV Controls and Electrical => Topic started by: 455bird on May 26, 2009, 07:27:31 PM

Title: hayabusa oil pressure
Post by: 455bird on May 26, 2009, 07:27:31 PM

Do any of you run an oil pressure gauge on your busa motors? I going to run an after market oil pressure gauge but what kind of pressure should see? 

Title: Re: hayabusa oil pressure
Post by: artie on edge on May 26, 2009, 07:37:22 PM

Check the manual....

Title: Re: hayabusa oil pressure
Post by: artie on edge on May 26, 2009, 07:42:23 PM

Here ya go.................. "Oil pressure should be 30psi at 3000rpm and 50psi at 6000rpm. At idle about 10psi is good."