0 Members and 1 Guest are viewing this topic.
Thanks y'all. That makes me feel better. Nobody at Kartek has ever led me wrong when buying from them, but I just needed reassurance, I guess! DS, I hope your tranny is "in production", and fabr, I have ran into a few delays, but hope to use your scales in the next week or so.
My Gear One stub axles call for 250 ft-lb. I always give them a little extra. Had a hub strip once due to not tightening the axle nut enough, lesson learned. Also I use a piece of angle iron to counteract the force and I found a torque wrench at the surplus store that goes to 3600 in-lbs; score for $40.