DTSFab.com (Desert, Trail and Sand)

UTV's Off Road ( RZR, YXZ, Mini Buggy, Carts,etc.) => UTV Motor and Drivetrain => Topic started by: 455bird on August 15, 2009, 06:47:56 AM

Title: header
Post by: 455bird on August 15, 2009, 06:47:56 AM

Can somenoe make this header and how much would it cost me?

Title: Re: header
Post by: fabr on August 15, 2009, 06:59:52 AM

Yes but no time to do so. :'(

Title: Re: header
Post by: fastcorvairs on August 15, 2009, 07:11:24 AM

Quote from: 455bird on August 15, 2009, 06:47:56 AM

Can somenoe make this header and how much would it cost me?

What would be bad about buying the one in the picture?

Title: Re: header
Post by: fabr on August 15, 2009, 07:20:30 AM

Price perhaps?

Title: Re: header
Post by: 455bird on August 20, 2009, 02:00:33 AM

Title: Re: header
Post by: fabr on August 20, 2009, 05:54:37 AM

I understand but have you ever made a header of that quality? They're not getting rich building it for 1200 bux.

Title: Re: header
Post by: fastcorvairs on August 20, 2009, 06:11:04 AM

Title: Re: header
Post by: Doug Heim on August 20, 2009, 11:20:17 AM

if its stainless thats not too bad considering the quality. Anyone with the skills to make it would still need to purchase it to copy it exactly if thats what you were after. Maybe not but its still good to have somthing to work off of even a print. Have you looked on Ebay for an alternative? I cut up my headers anyway to re route them.

Title: Re: header
Post by: Carlriddle on August 20, 2009, 12:45:12 PM

Saw a cool little setup for headers on Spike's Xtreme 4X4 where the company sends lots of little swiveling plastic pieces that you route the way you want then lock all the bolts down send it back and they make the header.  They used it to make some custom header pipes for an old bike they were restoring.  I see if it is still recorded on my DVR, and get their name.

Speed channel Two Guys Garage  Episode 805 Cafe racer. 
Now to see if I can find the video.

Title: Re: header
Post by: cleppla on September 03, 2009, 12:17:16 AM

I found this just searching the internets.

http://www.stainlessheaders.com/customheaders (http://www.stainlessheaders.com/customheaders)

Title: Re: header
Post by: Carlriddle on September 03, 2009, 05:55:15 AM

Thats the one!!

Title: Re: header
Post by: fabr on September 03, 2009, 06:12:55 AM

Costs?