Recent Posts

Pages: 1 2 3 4 5 [6] 7 8 9 10
51
Welding/Cutting/Bending/Forming / Re: Got this weird Welder
« Last post by fabr on September 19, 2018, 04:22:42 PM »
Use the argon you have then decide if you want to go different.Argon is best for SS,4130 and aluminum but fine ,generally, for steel.
52
Welding/Cutting/Bending/Forming / Re: Got this weird Welder
« Last post by dsrace on September 18, 2018, 08:41:23 PM »
well welding steel with argon should be fine. more expensive than c25 but better.
53
Welding/Cutting/Bending/Forming / Re: Got this weird Welder
« Last post by Voodoochikin04 on September 18, 2018, 07:20:20 PM »
we wired the new outlet for 220 with a double pole 40amp breaker in (double 40's) and ran that to a matching outlet as the plug.  The setup came with an extension cord slightly thicker than the cord for the welder.  So I should be good on that.


What about welding steel with 100% argon?
54
Welding/Cutting/Bending/Forming / Re: Got this weird Welder
« Last post by dsrace on September 18, 2018, 10:45:05 AM »
make sure you have a 12g extension cord and a real 20 amp outlet thats on a real 20 amp breaker cause you'll prob be welding in the 160 amp setting. as old as it is i doubt it will produce like it once did.
55
Welding/Cutting/Bending/Forming / Re: Got this weird Welder
« Last post by Voodoochikin04 on September 17, 2018, 04:24:13 PM »
100% duty cycle at 90amps with a draw of 10amps
30% duty cycle at 160amps with a draw of 20amps.


i guess to my non trained brain, id think outputting a higher amperage would also consume more amps?  idfk lol

I think it came from a construction crew, the tank cap had a big loop welded to it like youd see when the road crews hoist their shit up on the crane overnight.
56
Welding/Cutting/Bending/Forming / Re: Got this weird Welder
« Last post by fabr on September 17, 2018, 03:42:11 PM »
The cord size doesn't have to be larger. If I see the spec plate right it only draws 20 amps @ 30 % duty cycle and 10 amps at 100%. Kind of hard to believe but that's what I think it says.
57
Welding/Cutting/Bending/Forming / Re: Got this weird Welder
« Last post by dsrace on September 17, 2018, 01:35:22 PM »
never heard of that brand and old but hey if it works then go for it!
58
Welding/Cutting/Bending/Forming / Got this weird Welder
« Last post by Voodoochikin04 on September 17, 2018, 11:29:21 AM »
So... I got this weird welder for free.  It seems to work good.  Had been sitting unused for who knows how many years evident by the 3inches of dust built up on it and inside.  I cleaned the thing out. Put some wire in it. Hooked up the tank which was full and its 100% argon which ive always believed to not be good for steel welding? 

Also the power cord is tiny, compared to every other welder ive used.  Should I upgrade the power cord?  Anyways I cant find any info online about this thing.

59
Tools/Tips and Tricks / Re: Ever Had Trouble Burping Radiator?
« Last post by fabr on April 14, 2018, 11:15:56 AM »
Just don't let the fill tube suck air at any time.
60
Tools/Tips and Tricks / Re: Ever Had Trouble Burping Radiator?
« Last post by dsrace on April 14, 2018, 09:56:12 AM »
will do and my overflow is the fill which is higher than the radiator itself as it sits on top of the radiator.
Pages: 1 2 3 4 5 [6] 7 8 9 10
SimplePortal 2.3.7 © 2008-2024, SimplePortal