DTSFab.com (Desert, Trail and Sand)

Automotive Powered Off Road (AKA: Buggys, Jeeps, Trucks, Etc,Etc. ) => Motor and Drivetrain => Topic started by: fabr on January 23, 2019, 06:51:55 PM

Title: Now THIS is BUILDING an ENGINE!!!
Post by: fabr on January 23, 2019, 06:51:55 PM

https://www.enginelabs.com/engine-tech/the-equal-8-inside-dan-jesels-new-clean-sheet-12000-rpm-v8/

Feast your eyes on this totally new,clean sheet badass from Dan Jesel!!!

Title: Re: Now THIS is BUILDING an ENGINE!!!
Post by: dsrace on January 24, 2019, 06:53:45 AM

that is a work of art!

Title: Re: Now THIS is BUILDING an ENGINE!!!
Post by: fabr on January 24, 2019, 11:41:33 AM

The article was very interesting . Lots of no compromise innovations.1325 HP estimate N/A from 427 inches. Over 3 HP per inch.12,000 rpm.   Damn.

Title: Re: Now THIS is BUILDING an ENGINE!!!
Post by: dsrace on January 24, 2019, 11:50:19 AM

Quote from: fabr on January 24, 2019, 11:41:33 AM

The article was very interesting . Lots of no compromise innovations.1325 HP estimate N/A from 427 inches. Over 3 HP per inch.12,000 rpm.   Damn.

2 valve n/a!!  the 12k rpm is what caught mt attention right off the bat. hp will be very impressive but 12k is a lot distance per gear!

Title: Re: Now THIS is BUILDING an ENGINE!!!
Post by: fabr on January 24, 2019, 12:47:16 PM

Bonneville bound.