Recent Posts

Pages: [1] 2 3 4 5 6 ... 10
1
Group Gatherings/Special Events / Re: Thanksgiving
« Last post by fabr on November 29, 2024, 11:06:45 AM »
Same to all!!!
2
Group Gatherings/Special Events / Thanksgiving
« Last post by dsrace on November 29, 2024, 10:19:06 AM »
Happy thanksgiving dts memners
3
Group Gatherings/Special Events / Re: LS Spring 2025 Run Dates 4/28-5/4
« Last post by dsrace on November 05, 2024, 09:05:20 AM »
Looks right to me
4
The video room / Re: Glamis
« Last post by dsrace on November 02, 2024, 07:56:24 PM »
5
The video room / Glamis
« Last post by dsrace on November 02, 2024, 07:37:33 PM »
https://youtu.be/dKB-QfX_mgU?si=XFsFF3I8LjYOobW3
6
Group Gatherings/Special Events / Re: Fall 2024 group run ls ok oct 21 thru oct 26
« Last post by fabr on October 31, 2024, 06:54:12 AM »
That .09 is 25% more wear.  I would call that substantial more wear. I think the LE grease is likely substantially better than the 101 but the 165/164 is better than both. I have seen no visible wear in my 934 cv's using it. I did need to replace one 934 due to a soft spot in one of the ball tracks. No grease will help with that.
7
Group Gatherings/Special Events / Re: Fall 2024 group run ls ok oct 21 thru oct 26
« Last post by dsrace on October 31, 2024, 06:17:08 AM »
Swepco 101 moly grease looks like a .60 wear



8
Group Gatherings/Special Events / Re: Fall 2024 group run ls ok oct 21 thru oct 26
« Last post by dsrace on October 31, 2024, 06:13:13 AM »
An additional .09 mm wear at 176* f. I have been using swepco 101. Ill have to look up the specs on it later.
9
Group Gatherings/Special Events / Re: Fall 2024 group run ls ok oct 21 thru oct 26
« Last post by fabr on October 30, 2024, 06:34:15 PM »
This difference is why I will continue to use the 165/164 from Swepco.

LE Almamoly:Four-Ball Wear @ 75ºC, 1,200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D2266
   0.45

Swepco165/164:Four Ball Wear Test (ASTM D2266)mm..0.36.

Big difference there. Pretty similar otherwise. I'll stay with the Swepco.

The Swepco164 is a caulking gun tube and the 165 is a grease gun cartridge. Makes cv service a lot easier.
10
Group Gatherings/Special Events / Re: Fall 2024 group run ls ok oct 21 thru oct 26
« Last post by fabr on October 30, 2024, 05:47:45 PM »
I've been using https://www.swepcolube.com/products/swepco-165-molyxp-extreme-pressure-grease/ the last 3 years or so. I like it as it has plenty of cling yet will flow and not dry out.
Pages: [1] 2 3 4 5 6 ... 10
SimplePortal 2.3.7 © 2008-2024, SimplePortal