Author Topic: Odypilots' 600 Rotax Pilot  (Read 6524 times)

0 Members and 1 Guest are viewing this topic.

odypilots

  • Guest
Odypilots' 600 Rotax Pilot
« on: February 24, 2009, 04:27:29 AM »
After racing in a enduro that was the definition of "slop fest" last year, sucking dirty water through the air filters, and blowing up my engine, I've been working on getting her going again. Bugpac was kind enough to allow me garage space, and a bunch of help.

In the rush to make racing season in 2007, AtvNut and I cut some corners to get it on the track. The wiring and radiator mounts being the most glaring. So out came some unneeded wiring. It's still a combination of the Pilot  and the SkiDoo harness, but it's neater now. With AtvNut on the phone, we also wired in a kill switch, so the teather doesn't have to be pulled to shut the engine down.

Bug designed some brackets to use Rick S' very well thought out radiator mounting system, and Rick made up those brackets to go with his rubber mounts, that Bug then welded in. I chose to offset the radiator to allow it to stand more upright to promote better airflow through it.

I'm including a couple of pictures to show the engine cradle and mounting that never got photographed in the original rush to complete the project.

SPEC

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #1 on: February 24, 2009, 04:30:29 AM »
Good to see your gettin it up and going again odypilot ;D

odypilots

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #2 on: February 24, 2009, 05:29:13 AM »
Thanks, Spec. It's been sitting too long, and without Bug's encouragement, would still be sitting. I can hear Bug's voice now, "Git Er Done!". :)

SPEC

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #3 on: February 24, 2009, 05:38:55 AM »
Thanks, Spec. It's been sitting too long, and without Bug's encouragement, would still be sitting. I can hear Bug's voice now, "Git Er Done!". :)


Seems to me I can relate to that statement...Ive heard that from him myself a time or two ;)

Admin

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #4 on: February 24, 2009, 04:23:59 PM »
Let me tell you. some of these mods were not a simple "do it like this Dave" I had to convince him as well. Guess that used car sales experience payed off here... ;D

artie on edge

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #5 on: February 24, 2009, 04:30:05 PM »

Admin

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #6 on: February 24, 2009, 04:35:19 PM »
I just bloody knew it....... just knew it !!!!

Had our own business Mother/father and I for about 3yrs, Likely would still have it, but i did not have enuff time to devote after my dads passing, Mother could not do it alone, Anyhow sorry for hijacking...

Admin

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #7 on: February 24, 2009, 04:35:45 PM »
Oh, My wife tells me i could sell ketchup popsicles to woman in white dresses... ;D

Offline Engineer

  • Inquisitor
  • Global Moderator
  • *
  • Posts: 2657
Re: Odypilots' 600 Rotax Pilot
« Reply #8 on: February 24, 2009, 04:47:00 PM »
Looks Good!  Looks like there might be some shock upgrades there as well.  If you don't mind I have a few questions from my odessy ignorance.

I take it the original engine was not a Rotax....  Was it a single?  How many CC?

Is the gear/chain box we see in the rear the original for the machine?  Are you running the original CVT?

Anyone know a good source of info on these machines?  I would like to read up.  My Uncle had a yellow one when I was a kid, but I don't remember much.

Admin

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #9 on: February 24, 2009, 04:58:09 PM »
Pilot not odyssey... ;D

Offline Engineer

  • Inquisitor
  • Global Moderator
  • *
  • Posts: 2657
Re: Odypilots' 600 Rotax Pilot
« Reply #10 on: February 24, 2009, 05:01:10 PM »

Admin

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #11 on: February 24, 2009, 05:02:34 PM »

Offline Engineer

  • Inquisitor
  • Global Moderator
  • *
  • Posts: 2657
Re: Odypilots' 600 Rotax Pilot
« Reply #12 on: February 24, 2009, 05:10:49 PM »

Admin

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #13 on: February 24, 2009, 05:12:42 PM »
Very nice!  Thank You.........  But can't you see how I was confused?  ;D

I have seen it since the first day you joined, whats new? ;D

Admin

  • Guest
Re: Odypilots' 600 Rotax Pilot
« Reply #14 on: February 24, 2009, 05:13:40 PM »
I know the answer to every question you asked, but since this is odypilots thread, and i can barely get him to post, Ill let him do so... ;D

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal