0 Members and 1 Guest are viewing this topic.
Box in the mount, 2 flat plates make a poor structure.
I am not sure but the third pic looks like you are swinging three different arcs.It looks like the two lower are parallel to each other and the one closest to the camera is contrary to them. Is that what I am seeing?
WelderI think what your seeing is the whole carrier is rotated 45 degrees, so the lower two arms look one on top of the other. Two of the three Travis rods two lower swing the same ark. While the upper shorter rod swings a little smaller ark. Rear tires pretty much travel straight up and down. No caster or camber over 20 inch's.
Now it looks totally different.I apologize for the PUTI.How did the other side do ?
It is simi boxed just did not go far enough with the top plat on the bracket. It'll get some new bracing when I am done this time. alot of this damage could have been done for a long time. Just got to the point that it couldn't hold on any longer.
Fill it in here.