0 Members and 3 Guests are viewing this topic.
And you COULD have gotten the FAST ecu and avoided all of that BS. Sorry,I just had to add this comment. I hope /know you guys will figure it out.
It will datalog any channel desired, tooth logger, composite logger, etc..Only one WB so individual trims is something I would not be comfortable with messing with unless there are egt sensors stuck in every port.Yes sir they all have way more than most will ever need or use! But when the expansion ability is there, it sure is nice to have it and not have to buy/build a new controller.
tuning with egts is a bit risky . Just too slow response.
With my old AEM setup, I use fuel trims for evening out bank-to-bank fueling since one side of the block was leaner than the other on that build. Dual widebands sensors, works very well.. To bad its 12 years old and about to crap out completely. MS3 to replace that dinosaur!