0 Members and 1 Guest are viewing this topic.
enemy can you expand on the camscrank sensor swap on busa from gsxr 1000 or a link so others havean option to look into if neeeded
enemy if you were to purchase a rugged set i thought this may be an option for a mounting solution https://www.ruggedradios.com/index.php?main_page=product_info&cPath=736_401&products_id=2336if one was to mount this up on the roof before a new roof was made, it would allow for the shortest coax cable and solve a limited space issue on the dash 1 3/16" taller than the cage bar.
I have the Rugged RM-60 and the 660 intercom and been very happy for about a year now. The only issues I have are when I plug my phone charger in to the dash I get some RF noise. And I have the Alpha Bass headset for myself and the battery only lasts a few minutes. I need to send them in this month to see if they can fix them. Otherwise I have had no problems and most of my group runs the same setup.
Quote from: dsrace on November 27, 2017, 01:00:14 PMenemy if you were to purchase a rugged set i thought this may be an option for a mounting solution https://www.ruggedradios.com/index.php?main_page=product_info&cPath=736_401&products_id=2336if one was to mount this up on the roof before a new roof was made, it would allow for the shortest coax cable and solve a limited space issue on the dash 1 3/16" taller than the cage bar.Yea! that may work out nicely! The mount that is... I have no roof
There's a shit load of info on EFI sites about CD ignitions noise effing up aftermarket EFI ecu's brains. Gotta be perfect on the wiring ,connector quality and wire looms locations/separation.Hope you get this all sorted out so I can fix mine finally!