0 Members and 1 Guest are viewing this topic.
There's 12 inches of travel from one bind point to another. I don't know what that translated to into degrees. Don't forget that we build these as narrow as possible, with Dave's buggy being around 55" from one side of the wheel to the other. The cars you guys have should be able to get 20 inches easy.He's the guinea pig on these joints, so we'll see how they perform. They have to be better than rod ends, because they are a pain in the ass IMHO !! Rod ends wear out too fast, and need high angle spacers to be able to use them as upper and lower joints.My concern will be the steering effort, because they are much tighter that rod ends.I agree that bump steer is easy to make zero. Both my buggys can be driven through rough terrain with only your thumb and forefinger holding the steering wheel.Dan