0 Members and 2 Guests are viewing this topic.
Do you thing 40* on the bottom arms is to steep? 23'' sounds good but Im with you how much do you need. I can strap it to less, Im just wondering if 40 is to much.Could it cause problems?
Bob, really wish you'd post up some pics. But in mean time, big wheel travel can be harder to tune suspension on, and the bumpsteer thing too. I would not get dead set on travel in front yet, dont build shock mounts. Cause on the rear, even with a good 930 on inside you prob wont go past 25-28* angle with them. And longest stock 930 axles are 28", so can't get 24" travel in back. (have since found that RCV will do longer ones for not much more than standard ones ) No sense have 24" in front with 18" in rear. We Need Pics!
ya you have to fix that.
In the pics. you cant tell camber because I dont have lug nuts yet. With the lower arms at 14* for ride height (witch may change) the camber is -9* bump and +9* droop. If ride height had a little more droop it will go to neg 13* at bump and pos. 7-9* at droop.