0 Members and 1 Guest are viewing this topic.
Are you saying that you want to c'sink the alum. wheel for the nut's taper?I remember reading somewhere not to do this with alum. wheels.Most are designed with the holes sized tight to the studs for location. If you c'sink the wheel it can egg out the hole over time. I could be wrong, but this is what I've heard.
Here are the nuts i want to run. http://www.pacificcustoms.com/mm5/merchant.mvc?Screen=PROD&Store_Code=PC&Product_Code=WHL014&Category_Code=I want to drill a countersink or bore (not shure of the correct term here) so the nuts have the proper mating surface and not need to run these stupid washers.
I use the washers - they are not too bad. never thought about drilling the wheels.....
Pictures of the your rim's. Show us some pic's of you rim's. Are you saying that you have a 5/8 thix rim that does not have a lug nut champher in them? I though that the .190 non bead locks were the only ones that required the big washers.