0 Members and 1 Guest are viewing this topic.
You guys come up with some cool stuff. Apparently the other side of the pond has cooler stuff readily available than we do. On the other hand maybe you just do a better job researching this stuff than I.
Quotehad a better look at the rams today, dident want to buy another but l think l will both of these are well and truly bent, over 2" bend over 30 " BalooAs resourcefully as you yanks are over there I am amazed that you have not pulled that ram apart put it in a press and have it straight as a string line ah hanging from a tree. That rod is not hardened and would doubt that it would work harden while pressing it back straight. using a couple of v-blocks and a soft pin with a v cut in it.
Fella on OFN spoke very highly of those little encoders,said they are made very well for the price.I have been eyeballing them for my powersteering bender,problem is they are always out of stock?
Quotehad a better look at the rams today, dident want to buy another but l think l will both of these are well and truly bent, over 2" bend over 30 " BalooAs resourcefully as you yanks are over there I am amazed that you have not pulled that ram apart put it in a press and have it straight as a string line ah hanging from a tree. That rod is not hardened and would doubt that it would work hardden while pressing it back straight. using a couple of v-blocks and a soft pin with a v cut in it.