We have carnage.. Bugs Drak..

[Engineer]

Looks like the upper shock mount is in line nicely now.  What is the ETA for testing?

[Admin]

 I got to get a few more pieces yet, Likely wont have them till late next week, so probbaly the weekend after...

[Admin]

My first good try at autocad....

[Carlriddle]

Brake disc?  Still coming over for B-day? 

[Admin]

It is a brake disk, But not what ill be using, Rick S is drawing the useable part.... Yes ill be over next weekend...

[Admin]

Here is the shock mount gusset, Not my drawing...

[Engineer]

[Yummi]

[Engineer]

Hate to see the "bad try."   

Here it is.......  It's 20.5 inches across so I am not sure what you would do with it.    Maybe mount a barstool on top of it!

[Admin]

here is my 3rd or 4th try, to the right scale

[Boostinjdm]

I think you need to center your bolt holes between the cutouts and rotate then move the slots in.  Thin material at the edge may want to burn.  The slots lined up with the cutouts makes for very little material also.  If you want to email me your file, I will modify and send it back so you know what I mean.  Then you can just trash it if you don't like it.  If it is autocad I should be able to do what I described in just a few mins.

[Admin]

Whole idea was for it being symetric, I am not using it anyways, Rick has drawn up the useable rotor...

[Boostinjdm]

[Admin]

It would still be symetric.....  Just email me the fookin file so I can show you what I mean.  I'm too lazy to draw it from scratch to make a point.

I figured out what you meant and see the problem... I had points aligned but when i fillet, I had 2 different radius which back the points up...

[Admin]

Haven't updated lately but i am making progress, I am waitng for my lateral links back from Rick, the first time i fxxked up the measurements so he is remaking them... Besides that a quick spray paint job and i can start outing it back together...