DTSFab.com (Desert, Trail and Sand)
The DTS Trader => Wanted => Topic started by: Buggybaz on March 17, 2011, 06:21:15 AM
-
G'Day you blokes.
Anyone have a puller bolt for an Arctic Cat 550,circa 90's? Round,6 bolt cover.
Also need a complete drive clutch as spare,and starter ring gear.
-
Looks like a Comet 102C puller would probably work.
-
I ended up making one,I musta made a mistake because it worked flawlessly! Less than 10 secs off.
7/8" x 14 x 2" long HT bolt,$3.50,+ a long 1/2" HT bolt I found in my manshed,$0
I cut the bolt head off,then rounded/domed it.
Then ground away all the threaded portion to about 3/8" to insert into the crank end,also rounded off.
Then counterdrilled the end of the 7/8 bolt to take/locate the dome end of the pusher bolt.
Bit of grease on all the threads and domed ends to limit the friction and BAM!
-
Necessity,the mother of all inventions!
-
Yes so true.
But also living in the most isolated capital City in the world does that!
Beggars can't be choosers! :)