DTSFab.com (Desert, Trail and Sand)

Automotive Powered Off Road (AKA: Buggys, Jeeps, Trucks, Etc,Etc. ) => Motor and Drivetrain => Topic started by: fabr on September 26, 2019, 11:53:27 AM

Title: "New" Engine Parts Coating
Post by: fabr on September 26, 2019, 11:53:27 AM

Hmmmm,interesting.  https://www.line2linecoatings.com/APConPistonSkirts.pdf

Title: Re: "New" Engine Parts Coating
Post by: dsrace on September 26, 2019, 10:28:16 PM

thats an interesting read

Title: Re: "New" Engine Parts Coating
Post by: fabr on September 27, 2019, 05:57:48 AM

I thought so. You catch the part about closing up the clearances on the turbos?

Title: Re: "New" Engine Parts Coating
Post by: dsrace on September 27, 2019, 06:11:49 AM

i did as well as better throttle response. the one thing i didnt read was what kind of temp reductions that coating offered to the parts it was applied too. i didnt have time for an indepth read so i will have to read it again.

Title: Re: "New" Engine Parts Coating
Post by: fabr on September 27, 2019, 06:45:29 AM

They offer a different heat barrier coating.  The abradable coating is basically graphite so it would be fairly high but not a barrier coating.

Title: Re: "New" Engine Parts Coating
Post by: fabr on September 27, 2019, 06:48:08 AM

Then there is this. I think it adds a bit of credibility to the product.  https://events.esd.org/wp-content/uploads/2018/08/47-Suman-Andrew_final-paper-Rev4.pdf

Title: Re: "New" Engine Parts Coating
Post by: dsrace on September 28, 2019, 09:11:32 AM

that is pretty impressive really!

Title: Re: "New" Engine Parts Coating
Post by: fabr on September 28, 2019, 09:46:39 AM

I have yet to find anything negative. Everything I can find has been really positive.