0 Members and 2 Guests are viewing this topic.
Fast's car is set up somewhat like this. His rear arms are back a bit further as mentioned above. Results in axle being run through arms. Maybe he can chime in.
Axles are around 580 and I just found the listing for the bearings. I wouldn't say its going anywhere yet, but I've been slowly getting things inorder.The midboard with inboard brakes seems like a lot of guess work. I've got RCV's so I'll make a move on the bearings next. Could be a waste of time but I'm in not hurray and want the best I can come up with regarless of the way that it takes me.
Fixed pix I think and this is the side view.
Simpler, lighter, stronger.I would also redo the X brace in the B-pillar. Some diagonals from the top link mounts to the center of the floor bar, then an X brace from those to the upper corners on the hoop. But that's just Me......