DTSFab.com (Desert, Trail and Sand)

The DTS Trader => Wanted => Topic started by: Boomer-61 on January 17, 2010, 03:14:00 PM

Title: parts needed
Post by: Boomer-61 on January 17, 2010, 03:14:00 PM

I'm looking for some mounting tabs for 1" dia tube steel.  The hole needs to be for a 1/2" bolt.  The prefered distance from the tube to the center of the hole needs to be as close to 1" as possible.  I need 16 if anyone has any lying around their garage needing a new home.  The other thing I need is heim joint spacers, the high offset alignment type that take the 5/8 hole in my heim down to 1/2".  I need 16 of those also.  If I'm not making myself clear enough I can take some picures of exactly what I need. 
Thanks

Title: Re: parts needed
Post by: Voodoochikin04 on January 17, 2010, 03:50:46 PM

check your build log, i posted a solution

Title: Re: parts needed
Post by: Boomer-61 on January 17, 2010, 04:02:30 PM

Saw it. Thanks.  I'll check with him.

Title: Re: parts needed
Post by: fabr on January 17, 2010, 05:15:34 PM

PM DougHeim

Title: Re: parts needed
Post by: Boomer-61 on January 17, 2010, 06:51:50 PM

PM sent.  Thanks.