Author Topic: WOODGAS  (Read 20640 times)

0 Members and 1 Guest are viewing this topic.

Offline Boostinjdm

  • Hero Member
  • ****
  • Posts: 1609
Re: WOODGAS
« Reply #45 on: April 23, 2009, 12:59:22 AM »
Yep, leave a note for the ole' lady in an envelope marked "read only after disaster".

Inside it should read something like.

"Don't forget to take the trash out.  Sorry for the mess.  The camera is on the workbench, don't forget to post up the vid for the guys at DTS.

Spec"
This post has been edited due to content.

SPEC

  • Guest
Re: WOODGAS
« Reply #46 on: April 23, 2009, 08:59:29 PM »
Spec? Mate? This looks decidedly illegal! It aint gonna blow up n stuff is it?

If it is, do you mind videoing it and posting the results? Or get someone whos not blown into lil biddy pieces to post it up... and and can you NOT do this until the next batch of pickles is cooked up n sent off?

Good bloke... that Spec...was.....


I'd be happy too ;D
Fooker you prolly jinxwd me now...I already boomed a motor and a reactor ;D
I'm bringing it with me when I come.......






WE'LL TEST IT IN YOUR SHOP.......AND YOU CAN HOLD THE CAMERA ;D

So it's the dancin' pickle dude??? on the shifter????

artie on edge

  • Guest
Re: WOODGAS
« Reply #47 on: April 23, 2009, 09:23:18 PM »

I'd be happy too ;D
Fooker you prolly jinxwd me now...I already boomed a motor and a reactor ;D
I'm bringing it with me when I come.......






WE'LL TEST IT IN YOUR SHOP.......AND YOU CAN HOLD THE CAMERA ;D

So it's the dancin' pickle dude??? on the shifter????

You makw me  aplug and Ill cast it for ya. (serious)

SPEC

  • Guest
Re: WOODGAS
« Reply #48 on: April 23, 2009, 09:29:22 PM »
 ;D
I'LL Bring it with me

SPEC

  • Guest
Re: WOODGAS
« Reply #49 on: April 29, 2009, 09:34:26 PM »
Since it was a cold dreary, rainy day I got some time in on the reactor...
I got some flanges cut for the top and the bottom...mostly ass...er I mean head scratching...
I'll need to take it apart in the future, to adjust the tat ejector's, and some maintenance, so it has to un-bolt....And be air tight to some serious vacuum numbers...Got that herculese pulling all it's air/fuel off of it...
Came up with some new grate idea's...will prolly have more tomarrow

Offline fabr

  • Administrator
  • *
  • Posts: 93164
Re: WOODGAS
« Reply #50 on: May 01, 2009, 06:43:51 AM »
I wanna see it work! :)
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

SPEC

  • Guest
Re: WOODGAS
« Reply #51 on: May 01, 2009, 08:01:51 AM »
I hope to have some more pix tonight...

SPEC

  • Guest
Re: WOODGAS
« Reply #52 on: May 09, 2009, 05:42:46 PM »
Well tomarrow came and went...
But Today I got some time in on the reactor...
I got the clean out opening fitted and welded up
The collar for the upper hopper fitted and welded up, and re-fitted, the upper hopper will be slide on & off, Goobed up on the bottom to seal it...
I have some more ass ....er head scratching to do on the H20 injection before I go much further, I want to catch the water vapor coming off the wood in the chamber and re-inject into the pyrolization zone... This will increase my Hydrogen production... so I don't want to get ahead of myself with the outer shell, But I can fit the clean out,and get that welded up...

SPEC

  • Guest
Re: WOODGAS
« Reply #53 on: May 09, 2009, 07:04:42 PM »
I guess some pictures would be nice huh? :P
This set is of the upper hopper...It mostly just holds and pre-heats the wood chunks...This is where I want to capture some of the water vapor I intend to inject into the reactor...When I get that far I'll post some pix

SPEC

  • Guest
Re: WOODGAS
« Reply #54 on: May 09, 2009, 07:14:43 PM »
Here's a couple of the clean out door...Keeping in mind this sucker could see upwards of 30" of Vacuum...Dollars spent on this project....ZERO except for wire/gas/electricity

boltz2012

  • Guest
Re: WOODGAS
« Reply #55 on: May 09, 2009, 08:18:46 PM »
It looks awesome bro. Not sure exactly what the hell it is other than a bunch of tubes so far but i know where you are going with it. Very interested in this so keep us posted. Also have you ever heard about the h2o buggy. Look it up on youtube. Thats a real story. After the guy got it all figured out he said you could drive across the united states on like 12 gallons of water. Said you could put tap water in it...snow..or if times were tuff pee in it. After he got it all figured out some towel head offered him 2 billion dollars to put it on the shelf and forget about it and he told them no that hed built it for the american people. About 10 days later he died in a resteruant. Someone had posioned the food. His house was ransacked and no ones heard of it since. You should really look it up. Pretty cool and i think kinda on the same level as you are thinking...

SPEC

  • Guest
Re: WOODGAS
« Reply #56 on: May 09, 2009, 08:22:11 PM »
I read all about that a while back...It was one of the inspiring things to doing this...
Plus I'm Pretty much a Renegade when it comes to most aspects of life
 ff:

Offline fastcorvairs

  • Lifetime VIP
  • *
  • Posts: 2892
  • If it is worth doing!!!!!! Do it in the sand
Re: WOODGAS
« Reply #57 on: May 10, 2009, 08:29:04 AM »
Spec

You will need a army 6x6 to carry that thing when it is done. ;D ;D

With your bad back you for damm sure will need a crane to lift it.

If I believe I cannot do something it makes me incapable of doing it. But when I believe that I can, then I acquire the ability to do it , even if I didn't have it at the beginning.

SPEC

  • Guest
Re: WOODGAS
« Reply #58 on: May 10, 2009, 09:23:42 AM »
Spec

You will need a army 6x6 to carry that thing when it is done. ;D ;D

With your bad back you for damm sure will need a crane to lift it.


 ;D
This one is a stationary unit ;D
Ya,
 I'm already am using the E-hoist to move it around...
The Mobile one will be a bit smaller and built alittle lighter...
Off to the shop and garden for me ;D 8)

artie on edge

  • Guest
Re: WOODGAS
« Reply #59 on: May 11, 2009, 12:03:22 AM »

Plus I'm Pretty much a Renegade when it comes to most aspects of life
 ff:

WHAT?? You shxtin me arent ya?

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal