DTSFab.com (Desert, Trail and Sand)
UTV's Off Road ( RZR, YXZ, Mini Buggy, Carts,etc.) => UTV Member Project Logs => Topic started by: Carlriddle on November 09, 2017, 01:17:38 PM
-
Well after too many delays, time to force more air in this zx12 to get more out. So heres the plan;
garrett gt25 turbo
stainless log manifold, to mount off side of motor
500cc inj
e85
intercooler
new larger inline fuel pump
new Yoshi center drive section
variable rising rate fpr
billet clutch basket
Looking for 8-10 boost as that's safe number across net. Still on fence about low comp pistons to up the power, that will prob be next after I get this sorted. Never enough, never. LMAO
Many of parts on way, many more to come I'm sure LOL Pics as we go along. New center drive is in, few more braces. Too many side task to stay concentrated.
-
oh i can't wait to get to drive this!!!!! ;) ;) ;D ;D
-
looks like that turbo is off a volvo with a 2.3l in it. and says stock 16 psi should be your limit. so that's a cousin to the stock ihi turbo off the 87 88 turbo 2.3 ford. the 84 to86 were garrett 50 trim and good to 22 psi.
-
and we want pics! where are the pics gawd damm!t hurry up you only have a 5 months ;)
that 12r already , imo, has more accel than a stock busa so i cannot imagine what it will be like once you feed it illegal chinese experimental steroids ;D ;D
-
Freaking cool!! This is gonna RIPPPP
Justin
-
Slacked enough I guess
Ordered up bunch of parts, few more to go. First turbo the td04 deal fell apart had to get a refund because they wouldn’t ship it. So ran across a much better deal,
Garrett gt2560, aka gt28. Ball bearing, oil and water cooled. New At a price I couldn’t say no too
Stainless 2.5” log manifold hanging turbo off the side. Been a little slower with Xmas shopping. Lol
(https://s17.postimg.org/tvxl6mrtn/162_D9_FA8-5_AA6-42_AA-9187-_BC18_C761_D353.jpg) (https://postimg.org/image/tvxl6mrtn/)
(https://s17.postimg.org/ae2xqofgb/E3_FCD336-_B177-4083-_B906-9_EED710_F1_C06.jpg) (https://postimg.org/image/ae2xqofgb/)
Also changing our center sprocket drive, but slight delay as I may put in a rev box if Santa is good.
(https://s17.postimg.org/3nmghc7qz/5501_F064-12_DC-4_BB3-_ADF3-14_EB965_B6667.jpg) (https://postimg.org/image/3nmghc7qz/)
(https://s17.postimg.org/i6tliqt63/EC50_F9_FE-7_E93-4_DC5-8865-_A5_B7_C358_EF0_E.jpg) (https://postimg.org/image/i6tliqt63/)
-
this is going to be fun!!!!!
looking over my data logs from LS last night......mine is a journal bearing turbo so yours will spool faster , esp higher comp motor. i am making 1 psi boost at 44% tps at 1894 rpm at 14 afr. i have had a lot of time to read up on certain things and apparently there are a number of people pulling 2 * timing and leaning out to 14 ot 15 afr in the 100/106 kpa range right before boost range. to start spool up in a lower rpm range. been looking to find this range via my data log graphs.
-
something to dream about during this conversion ;D
https://youtu.be/hDlGHVeH8Io
-
WOOHOO!
Let there be BOOOOOST!
-
;D ;D
(https://s31.postimg.org/7eygyxrqf/25659807_2012995768941217_6264523944261040951_n.jpg) (https://postimg.org/image/7eygyxrqf/)
-
Nothing beats working for hr, then shopping for 2 hrs to find the next piece. Then waiting, lucky I have several projects going at same time like usual to fill the gaps. But sprocket drive out, RPM reverse going in. Motor back in, fitting some small parts, radiator moved oil cooler, intercooler up in. Throttle bodies off to fab shop, hes making a plenum for me, since they don't exsist. So a few pics cause we all like pics.
(https://s17.postimg.org/io11loswr/8_2.jpg) (https://postimg.org/image/io11loswr/)
-
Rpm mount from Yoshi, very nice piece and way easier than fabbing myself.
New turbo plenum, and spigots welded to throttle bodies.
And the new indoor creature comforts requested by my copilot. LOL
-
nice work. this i going to be a very fun rail when its done! rev will be nice . tb`s look really nice.
-
did they weld a bung in the plenum for a boost sensor? looks like they did a damn nice job welding the extensions on the tb`s and plenum looks really good to. so other than crapper and shower( which are be very very nice to have btw) .......you should`ve gotten then rail reassembled , fitted and running over the weekend lol lol
-
well?????
-
Well I always get side tracked with jobs. Like roofing a house, tiling a shower. And sometimes my actual job. And now 4 more side jobs too boot. But hey I’ll get a few things knocked out this weekend.
-
damn priorities ;D ;D
-
We all work better and longer when deadlines approach , don't we??????
-
unfortunately thats true lol
-
Well I'm not bringing it unfinshed to LS atleast rofl
Ok leaving real job to go do side job before buggy job. Drowning Drowning
-
you need to work faster LMAO
-
A few updates.
(https://s13.postimg.org/i1ro8tnlf/8_FF9_D21_F-7_D3_E-429_E-_AE64-_FB54_D314_EC4_B.jpg) (https://postimg.org/image/i1ro8tnlf/)
(https://s13.postimg.org/xn8zssez7/E1284_B38-63_E1-43_BB-_AF4_F-_C22_EB2_BC1072.jpg) (https://postimg.org/image/xn8zssez7/)
(https://s13.postimg.org/alsen1ur7/AFD32294-65_F8-4_A92-80_BB-_C6_A7233_DAB35.jpg) (https://postimg.org/image/alsen1ur7/)
(https://s13.postimg.org/npxyzquir/A3_A5_B180-03_D8-490_D-9_ADE-84_B26_AD7_BA7_A.jpg) (https://postimg.org/image/npxyzquir/)
-
Cool!!!
-
making good progress! looks good. the innercooler should work great there too. the larger fuel tank will come in handy too!
-
Well came home to a surprise gift, now more work to do.
But a sweet new jj: jj:
Rugged Radio Set!!
-
i need to get mine working I guess.
-
Carl!, I'm sorry I drug my feet and made you buy stuff from Yoshi!! I feel terrible.. His rpm mount looks about 15lbs lighter than mine anyway though.. So its a win there for the zx Boost monster
-
Carl!, I'm sorry I drug my feet and made you buy stuff from Yoshi!! I feel terrible.. His rpm mount looks about 15lbs lighter than mine anyway though.. So its a win there for the zx Boost monster
No worries, ya was busy, and I had waited too late.
-
bounce ;)
-
Getting real close guys, damn AN fittings bout broke me $$$ Should finish everything but the billet clutch basket this weekend. Drop it in, and hopefully fire it off and do a little tuning. :nw
-
pictures???? ;D
-
Yup,AN=$$$$$
-
pictures???? ;D
Of my empty wallet?
Not much pics wise of running plumbing, but This weekend with any luck it will run. Clutch basket should ship tomm. hh: dd:
-
we've all seen our own empty wallets from these
curses toys rofl rofl