DTSFab.com (Desert, Trail and Sand)
The Machine Shop => Welding/Cutting/Bending/Forming => Topic started by: fabr on May 29, 2012, 07:16:17 PM
-
Since some of us are starting new cars and maybe using some 4130 I ran across this just now and thought I'd post.
http://www.millerwelds.com/resources/articles/Best-Practices-for-GTA-Welding-of-4130-Chrome-Moly-Tubing (http://www.millerwelds.com/resources/articles/Best-Practices-for-GTA-Welding-of-4130-Chrome-Moly-Tubing)
-
That is one of the very few welding articles I have read that I agree with.
My only difference is I consider a gas lense a mo brainer.
-
That is one of the very few welding articles I have read that I agree with.
My only difference is I consider a gas lense a no brainer.
I agree. I can't believe I missed your reply 4 years ago. rofl Oh well,better late than never I guess. I also posted this article on GD today,stsarted to post it here and found I already had ,4 years ago!!!! 5: rofl