DTSFab.com (Desert, Trail and Sand)

UTV's Off Road ( RZR, YXZ, Mini Buggy, Carts,etc.) => UTV Controls and Electrical => Topic started by: Carlriddle on May 04, 2009, 05:27:22 PM

Title: Swith box
Post by: Carlriddle on May 04, 2009, 05:27:22 PM

Lookin for a switch box.  About 8-9" wide couple inch tall, couple inches deep, blank (no holes).  Aluminum, poly, steel.  Any good leads???

Title: Re: Swith box
Post by: SPEC on May 04, 2009, 05:45:24 PM

I could brake ya up one
Send me the exact Dims...
Bug has gotten stuff from me...In the past :o
I forgot...I roll my own pipes too ;D

Title: Re: Swith box
Post by: Voodoochikin04 on May 04, 2009, 05:47:50 PM

how thick of aluminum? diamond plate? welded? riveted? premade peices that you put together? how much you looking to spend?

Title: Re: Swith box
Post by: Carlriddle on May 04, 2009, 06:12:41 PM

Did some measurements   8" wide  3" tall 3 1/2" deep.

3/32" maybe 1/8" thick alum, smooth (gonna try to anodize)
Prefer bent/welded only screws for access.

steel prob not quit so thick.

Finding them on line for $40-$50.  Like the one above.