0 Members and 2 Guests are viewing this topic.
LMAOi ask as i`m wondering if king sand cars continued using the same spindles as short sand cars did as king has as long as iave seen there rails. if so, and if your going to continue running them, then there are good and bad studded heims. of course a more widely used design with double shear ends on the spindle uprights is, imo, the better way to go. this is why i asked as if you replace those studded heims with ones that are steel on steel ( especially the low carbon steel ones) or with the ones with the white nylon liners this issue will happen and again and must faster. those are weak and the white nylon lined will lose the liner and the stud will seperate then you spindles seperates and well you can imagine the rest! only use chromolloy with kevlar teflon lined, i speak from experiance.