DTSFab.com (Desert, Trail and Sand)

UTV's Off Road ( RZR, YXZ, Mini Buggy, Carts,etc.) => UTV Motor and Drivetrain => Topic started by: Tivie on February 22, 2011, 07:28:40 PM

Title: AN fuel line adapter
Post by: Tivie on February 22, 2011, 07:28:40 PM

What is the best way to convert the factory fuel connector on Busa to AN?  Jegs has an adapter but not sure if metric and standard fuel line dimensions are compatible.

Title: Re: AN fuel line adapter
Post by: Doug Heim on February 22, 2011, 09:27:37 PM

Are you talking about on the fuel rail? I make them up but its for an NPT. Simply buy and NPT to AN adapter and your set.

Title: Re: AN fuel line adapter
Post by: Tivie on February 23, 2011, 05:53:58 AM

I'm assuming, maybe wrong, the fuel rail connection and the fuel pump connection are the same?  Would this adapter work.  This part is described as an:  -06AN to 5/16" return

http://www.jegs.com/i/Aeromotive/027/15117/10002/-1 (http://www.jegs.com/i/Aeromotive/027/15117/10002/-1)

Title: Re: AN fuel line adapter
Post by: Lance-W on February 23, 2011, 07:09:05 AM

These work very well.  It's what we used on the Busa we have.

http://www.summitracing.com/parts/RUS-640860/ (http://www.summitracing.com/parts/RUS-640860/)

Title: Re: AN fuel line adapter
Post by: Doug Heim on February 23, 2011, 07:44:37 AM

Go with the Summit one Lance posted.

The one Im talking about replaces a section in the fuel rail.

Title: Re: AN fuel line adapter
Post by: Tivie on February 23, 2011, 08:03:00 AM

Thanks for your help