0 Members and 1 Guest are viewing this topic.
just an examplehttp://www.ebay.com/itm/T3-T3-Stainless-steel-304-TURBO-MANIFOLD-ADAPTER-38MM-WASTEGATE-FLANGE-OUTLE-/252383321270
for the 2.3 i am building i wanted a ss manifold with the collector in stock location to re use the 3 bolt turbo support bracket ford built. i like the idea of supporting the turbo from below to ease the hit to the manifold. now no one offers a ss manifold with collector in stock location with an external wg port so i bought one like i posted but made out of ss so rather than bolt it on i am going to tig it on so no gasket needed lol the turbonectics stage 3 turbo i have has no internal wg and that is fine as i plan on 30 to 35 psi boost anyways with 120 lb to 135 lb inj's on e85.
Let me find the pictures.
just taking measurement's of my buddy's car. The scoop intake will be above the radiator. may need to add a deflector to direct the air down a little from the radiator. but with that being said, I do like the looks of this set up. I'm sure your buddy made the scoops. but I thank, I have seen some nice fiberglass ones out there.
Where would you add bars? I could see a camberg clamp set up between the cross bars midpoint over the motor before the top cage for flex reasons, but where else could / would you put them?
Sorry for the hold up on the pictures I'll get them on here this after noon for sure. Just been swamped trying to get ready for Idaho and lots of new work at the shop.